How To Choose The Nozzle

The application of the nozzle is very wide, the variety is wide, and the spray shape is various. How to choose the nozzle reasonably is the most concerned issue for the engineering designer. The Beidi Le spray is aimed at the above problems, and now it is simple to teach you some small doors when purchasing the nozzle. Teach you how to choose a good quality nozzle.

According to the purpose of nozzles can be divided into three categories: First, industrial nozzles Second, agricultural nozzles three, fire nozzles

According to the function nozzles, it can be roughly divided into spray nozzles, fuel injection nozzles, cleaning nozzles, landscaping watering nozzles, rocker nozzles for agricultural irrigation, desulfurization and dust removal nozzles for desulfurization and dust removal, and special nozzles.

Provision for nozzle selection under different conditions of use. In actual engineering, the phenomenon of mistakes caused by improper selection of nozzles is more prominent. Different types and models of nozzles have different conditions of use and installation methods. Classified by material, it can be divided into metal nozzle, plastic nozzle, desulfurization dust removal nozzle, tungsten steel nozzle. The selection, installation and orientation of the nozzle will directly affect the action time and water distribution effect of the nozzle. When the installation site does not have a ceiling and the water distribution pipe is arranged under the beam, the hot air flow will spread horizontally after rising to the top plate. At this time, only the upright type nozzle is installed upwards to allow the hot air to contact and heat the nozzle heat element as early as possible.

Classified by shape, it can be divided into hollow cone nozzle, solid cone nozzle, square nozzle, elliptical nozzle, two-fluid nozzle, multi-fluid nozzle and so on. Among them, the environmental protection industry mainly uses solid and hollow cone desulfurization and dust removal nozzles, cleaning nozzles, the textile industry mainly uses atomizing nozzles, the steel factory mainly uses oval nozzles, and the fire protection industry mainly uses solid cone nozzles.